Best Recessed Trolling Motor Trays of 2023

Last Updated: January 6th, 2022 | By: Gina

Fishing may be one of your favorite hobbies or your hunger to pass the time, but still, you can’t make for it because of the worry of having aches and discomforts in your legs and backs during a fishing outing. So in order to fix these problems of uneasiness and uncomfortable leg positions trolling motor trays came into the picture.

Trolling motor pedal trays is the ticket for all day long serene and soothed fishing, avoiding and reducing the chances of back and leg pain, injury being safer and let you enjoy more of your fishing without worrying about the nags. It also gives a new look to your boat; it grants you complete polish to your boat and ease for you.

Before you choose, do check out the durability of the foot pedal tray, its installation process, its water readiness, and whether it gives a snug fit for your fastest electric trolling motor. The top three recessed trolling motor trays are as follows.

At A Glance: Our Top Picks For Trolling Motor Foot Pedal Trays


EZ- Troll Tray

EZ- Troll Tray

  • Snug Fit

  • Water Ready

  • Easy To Install


Troll-N-Tray Aluminium


  • Budget-Friendly

  • Solid & Well Built

  • Very Smooth Slide And Locks


Minn Kota Rod Saver

Minn Kota Rod Saver

  • Lightweight

  • Sturdy And Long Lasting

  • Includes Hardware, Cutting Template Etc

5 Top Rated Recessed Trolling Motor Trays – Detailed Reviews

1. EZ- Troll Fishing Boat Motor Tray

[amazon box=”B009EPOB98″ template=”vertical”]

This recessed trolling motor tray is made in the USA and is a quality product. As it is well known that, while fishing you need to face lots of discomfiture and aches and to that trays are the solution.

So, EZ-Troll takes off the problems and accords a clean and crafted look to your boat. Installation is bit challenging but is not hard enough. This tray is a snug fit and value for money product.

Physical Specifications:

  • The inside recessed trolling motor tray dimensions are 9.5 inches W × 13 inches L.

  • The tray is made throughout with high impact resistant polyethylene plastic and UV color molded.

Technical Specifications:

  • The EZ- troll tray fishing motorboat has Screened Front drain and the forward pedal design level foot pedal and has 3/8 inch vinyl water tube.


  • The EZ fishing motor tray is compatible for almost all kinds of motors like Minnkota motors, Motor guides and many more. It does not fade and no color is required for the chip.The screen front drain causes proper drainage irrespective of the debris. It also allows for fast water drainage.Affordable.

  • The screen front drain causes proper drainage irrespective of the debris. It also allows for fast water drainage.

  • Installation is easy and includes installation instructions, cutting templates and most important hardware.


  • In spite of all these fringe benefits, the ease of installation depends on which type of boat you are having and takes around 3-4 hours of installing.

2. Troll-N-Tray Aluminium Recessed Trolling Motor Tray

[amazon box=”B00U204QFS” template=”vertical”]

This product is manufactured in the United States. This one is a high quality welded aluminum recessed trolling motor tray. It is a recessed foot pedal tray for trolling motor.

If you want to have a boat trolling motor tray to be enduring and sturdy, then this one will be the best choice. Undoubtedly, it also relinquishes you with comfy your legs and clean deck. You can effortlessly balance the trolling, but the only extra work you need to do is forging your own template.

Physical Specifications:

  • This recessed trolling motor tray has pretty thick metal and is made up of durable 5052.080 thick and high-grade aluminum having a 1-inch wide flange for mounting and drain plug.

  • The six stainless steel screws with blackheads are for mounting, drain hose and clamp. This tray is available in black and white colors.

Technical Specifications:

  • The troll n tray has a UV protection finish over the product. It is also having a universal design which is flexible


  • The trolling motor tray is a considerable product with an immense aspect of its own. It is a very durable product in the market and is best suited to the price too.

  • The troll n tray trolling motor tray requires only 1 or 2 hours for installation and is quite smooth and accessible. Its universal design feature makes it suitable to fit both Minnkota and Motorguide foot pedals.

  • This troll-n-tray can be available in different custom colors on demand besides black and white. It is available with hardware, drain tubes.


  • This trolling motor tray does not have a template of its own, thus we need to make a new with cardboard or something else.

3. Rod Saver Minnkota Recessed Trolling Motor Tray With Cup Holder

[amazon box=”B002IVCWM8″ template=”vertical”]

Rod saver flat foot tray comes in two types one is for Minnkota and another is for Motorguide. Here, you will learn about the Minnkota model. This tray is robust has various alluring features.

This product is a complete package of all the required features and is highly recommended to have this on your boat as it accomplishes both reliefs to pain and other technical demands.

Physical Specifications:

  • The Hole cut size of the Minnkota model is 11.25 x 16.75 inches. The outside dimensions are 13.125 wide x 18.25 long x 4 inches deep and that of inner floor are 11 x 12 inches.

  • The flat foot tray is having an aluminum coating. It has additional traits that are drain line, clamp, stainless steel screws, drain tube of 2 cm and stainless mounting hardware.

Technical Specifications:

  • The flat foot recessed trolling motor pan by Minnkota is constructed through heavy-duty 1/8 inch aluminum, which is durable and is coated with powder to have finished.

  • The earlier Minnkota motors of the late 1980s or 1990s have control pedals too, and that ere of probably 14 inches and will not fit into recess container.


  • Minnkota flat foot tray allows you to posture yourself in a better way which tends to avoid the back and leg pains. Safety and fewer obstacles are also its key leg- ups.

  • The product can be installed in any brand with easiness. It also contains mounting instructions, templates, and hardware.

  • The tray is a well-contrived product having a very reasonable price.


  • With this product, there is a bluff that screws which secures the plates gets bared off due to some flaws or because of bad quality.

4. R&R Design Recessed Easy Boat Trolling Motor Pan

[amazon box=”B003DW116E” template=”vertical”]

This trolling motor pan provides a solid, recessed foundation for your trolling motor pedal, and a great way to prevent clutter and equipment damage.

This is UV protected doesn’t rust or fade easily and its light weight will not add anything extra on the boat.

One good thing is that this universal design can accommodate any trolling motor foot control brand like the Minn Kota and Motor Guide.

Physical Specifications:

  • The outside dimension of the pan is 12 inches wide by 19-3/8” long.

  • The cut-out or hole-size in your boat deck is 10-1/2” wide by 17-3/4 inches long.

  • The inside mounting area is 9-3/4” wide by 17“long by 4” inches deep.

Technical Specifications:

  • A universal design fits most of the brands and an aluminum construction and comes with a black powder coat finish that keep the pan durable.

  • Features predrilled countersunk mounting holes.


  • Powder-coated UV protected aluminum.

  • Relatively lightweight.

  • Stores and secures the foot pedal.

  • Features drainage holes.

  • Fits almost all trolling motor foot control brands.

  • Effortless to install.


  • The corners a bit bent though not problematic.

  • May develop dents if hit by something hard.

5. Rod Saver Motorguide Model Flat Foot Tray

[amazon box=”B002IVAUQS” template=”vertical”]

If your back pain annoys you and puts you to discomfort but you love to fish then the Rod Saver by Motor guide model is the answer to this. This improves your posture and minimizes back pain enabling you to enjoy fishing for long periods.

You will even find the boat less cluttered and sorted completely. The chances of tripping over the trolling motor foot control are also eliminated.

Some Minn Kota trolling motors built in late 1980s and early 1990s have a control pedal that measures 14 inches in length and this won’t support the older models for this reason.

Physical Specifications:

  • The flat foot tray measures 19.5 x 14.25 x 6.25 inches; and weighs 4 pounds.

Technical Specifications:

  • This is a sturdy construction of 1/8 inch aluminum, baked-on powder coat finish.

  • Includes drain line, clamp, stainless steel screws, installation instructions, and cutting template.


  • Reduces back pain due to better posture.

  • Offers maximum safety and fewer obstacles to trip over.

  • Durable aluminum construction.

  • Comes with easy to follow mounting instructions.


  • The screws are not of good quality.

  • There isn’t much space for trolling motor cable.

6. LucaSng Marine Center Recessed Trolling Motor Foot Pedal Pan

[amazon box=”B083M7D5BH” template=”vertical”]

LucaSng Marine Center Recessed Trolling Motor Foot Pedal tends to replace mini Kota 100RTMP and is efficient and straightforward to use. The high-level performance of the product marks an easy boating experience.

Plus, if you wish to order the product inside the US, the product shipping will proceed and will arrive at your doorsteps within 24 hours.

Physical Specifications:

  • The product holds the physical specification of 9-3/4”Wx17”Lx4”D.

  • The outer flange of the product holds the dimensions of 12”Wx19-1/2”L.

Technical Specifications:

  • The best thing about the product is its universal application. It can fit across any brand of trolling motor that can be controlled via foot and will fit in the pan.


  • The product offers an easy and quick installation process.

  • The product holds universal application of use.

  • The product can be used for heavy-duty tasks.

  • The welds are strong, offering durable and reliable product quality.


  • Some users encountered the issue of bent metal or some rough-textured surface area.

Advantages Of Recessed Trolling Motor Trays

Here are a few advantages that vote for a recessed trolling motor tray and that will never make you go without one.

  • They add stability and comfort while you are fishing.

  • They minimize leg and back pain.

  • Even in rough weather you have added security.

  • Lastly, these trays add great look to your boat.

Related Read: Best Aftermarket Trolling Motor Props Upgrade

trolling motor pedal tray

Buying Tips You Need To Keep In Mind:

Let us take a rapid look at the factors that are essential:


You should always remain informed about your trolling motor specifications. Any or every product you choose then always read the characteristics of the unit before finalisation of the purchase.

This rule is applicable for all product line, from marine battery chargers, trolling motor trays, or trolling motors.

Safety Features:

While you are on the go tripping off is not acceptable when you are busy fishing. There are some important factors that need to be considered and this is one of the most mandatory as “safety first”.


Since the trolling motor tray will be exposed to harsh marine conditions during fishing sessions, ensure that you choose a one that’s sturdy and will give you strong support.

High-grade aluminum lasts long and the finishing touch is of superior quality. So, it is a great option to buy.


When you are searching for a unit for your boat it is important that you shop for the one which is compatible with your boat, as all may not fit all.


Light weight trolling motor trays will keep your boat stable and won’t put more pressure on it. While you perform you need to have a product that’s absolutely light.


Ease of installation is another feature that will keep you sorted. As hassle-free process is always a welcome. You can just go through the instruction manual offered by the manufacturer which is mostly well-explained and proves helpful.

Generally the installation is not hard but there are always few steps that need to be followed before you go for the set-up. Read to find out how to install your trolling motor tray.

Main Parts:

You need to be really careful with the main parts such as the clasp, stainless-steel screws, drain pipe, and more as they form the part of perfect installation.

Major Tools Required For Installation

For a proper installation of your trolling motor tray, you will need some quintessential tools.

Let us take a quick look:

  • A high-speed jigsaw.

  • A cordless sander.

  • A vacuum cleaner.

  • Utility knife.

  • A cordless drill (with a keyhole saw bit 1″, and 1/8 drill bit).

Just a few easy steps…..

How To Install A Recessed Trolling Motor Tray?

You are clear about the tools, so the next comes is the installation. The easy to go steps are here:

  • Starting step is opening the clamps of the bracket.

  • Slip the motor over the transom and you should position as close to the centre of the stern.

  • Then you need to make the clamps tight.

  • The brackets of mounting should be positioned on the apex of anti-cavitation plate.

  • Mark the drill holes in the anti-cavitation plate as you will be putting bolts there.

  • Now insert bolts and make them tight.

  • The assembly of the trolling motor should be separated from the mount-base.

  • The recessed trolling motor tray will be placed where you select and mark holes on deck.

  • A rubber washer should be placed underneath each bolt.

  • The base should be positioned above drilled holes and then slipped into each hole.

  • Lastly, you need to check and ensure that the level of the base rests perfectly against the deck surface.

Frequently Asked Questions

Q 1. How Hard Are These Really To Install?

Ans: In spite of all the benefits, the ease of installation depends on which type of boat you are having and takes nearly 3-4 hours of installing.

Q 2. Will It Fit The Foot Pedal?

Ans: In order to fix the problems of uneasiness and uncomfortable leg positions, the Trolling motor pedal trays is a ticket for all day long serene and soothed fishing, avoiding and reducing chances of back and leg pain, injury being safer and let you enjoy more of fishing without worrying about nags.

Q 3. Will This Work With A Motor Guide?

Ans: The EZ fishing motor tray is compatible for all kinds of motors like Minnkota motors, Motor guides and many more.

Q 4. How Long Does It Last?

Ans: The larger the rating, the more power the battery can hold, and longer it will be able to power the motor at a given speed. For example, a 100 ampere hour battery is one that would to supply 25 amps of power for 4 hours (25 amps * 4 hours = 100 amp hours) before running out of energy.